Жёсткий диск HDD IBM ST39103LC 9.1GB, 10K rpm, Wide Ultra2 SCSI LVD/SE, p/n: 36L8772, FRU p/n: 37L8773, 80-pin, 1 in

Характеристики

       UNFORMATTED CAPACITY (GB) ________________10.8
       FORMATTED CAPACITY (GB) __________________9.105
       AVERAGE SECTORS PER TRACK ________________303 rounded down
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________58,806
       CYLINDERS ________________________________9,801 user
       HEADS ______PHYSICAL______________________6
       DISCS (3.0 in) ___________________________3
       MEDIA TYPE _______________________________THIN FILM/MR
       RECORDING METHOD _________________________PRML 16/17 EPR4
       INTERNAL TRANSFER RATE (mbits/sec)________193 to 308
       INTERNAL FORMATTED TRANSFER RATE (MB/sec)_29.5 avg
       EXTERNAL TRANSFER RATE (mbyte/sec) _______40 Sync
            Low Voltage Differential(LVD) _______80 Sync
       SPINDLE SPEED (RPM) ______________________10,016
       AVERAGE LATENCY (mSEC) ___________________2.99
       BUFFER (/optional)________________________1024/4096 KByte
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________Ultra2 SCSI
              ASA II, SCAM level 2 (1 default)
       BYTES PER TRACK __________________________153,284-229,045
       SECTORS PER DRIVE ________________________17,783,240
       TPI (TRACKS PER INCH) ____________________12,580
       BPI (PEAK KBITS PER INCH) ________________252
       AVERAGE ACCESS (ms read/write)____________5.4/6.0
         Drive level without controller overhead
       SINGLE TRACK SEEK (ms read/write) ________0.7/0.9
       MAX FULL SEEK (ms read/write) ____________12.2/13.2
       MTBF (power-on hours) ____________________1,000,000
       SHOCK (G's, 11/2/.5 ms):
                operating (Read/Write) __________5
                abnormal ________________________10
                nonoperating ____________________75/230/100
       ACOUSTICS (Bels typical, sound power) ____4.3
       POWER DISSIPATION (watts/BTUs) Active ____/
                                      Idle ______7.68/26.2
       POWER REQUIREMENTS: +12V START-UP (amps) _2.2
                           +12V TYPICAL (amps) __0.34 idle
                           +5V START-UP (amps) __0.95
                           +5V TYPICAL (amps) ___0.72 idle
                           IDLE (watts) _________
       LANDING ZONE (cyl) _______________________AUTO PARK
       IBM AT DRIVE TYPE ________________________0 or NONE

       Physical:
                        Height (inches/mm):      1.0/25.4
                        Width  (inches/mm):     4.00/101.6
                        Depth  (inches/mm):     5.75/146
                        Weight    (lbs/kg):      1.2/0.544

Note: LW and LC drives do not have internal terminators or  any other way of adding internal terminators to the drive; use external active termination if required. Use active (ANSI SCSI-2 Alternative 2) terminators when terminating the bus.  Use active negation terminators when terminating a SCSI Ultra2 bus operating in Low Voltage Differential (LVD) mode.