Конвертор интерфейсов Allied Telesis AT-MX10 AUI to BNC Transceiver

Описание и характеристики:

Overview

The Micro Ethernet Transceiver Series of products are direct-attach IEEE 802.3 and

Ethernet Version 1.0 and 2.0 devices. ATI supports all common Ethernet media with

Micro Transceivers for thin coax (10BASE2), UTP (10BASE-T) and Fiber Optic

(10BASE-FL, FOIRL) LAN systems. The transceivers support a single AUI that

attaches directly to the AUI 15-pin connection found on most Ethernet stations

(DTEs). Direct AUI connection reduces cabling costs for the installer.

All ATI transceivers are equipped with LEDs providing status and diagnostic

information. LEDs make LAN installation and troubleshooting easy for the installer. An

easily accessible, user-selectable SQE Test switch (heartbeat) is also provided on all

models. ATI uses quality product packaging for increased reliability

Preparation

An SQE Test switch is available to provide IEEE 802.3 Ethernet SQE Testing. If

required, place the SQE Test switch to the “ON” position. The amber LED indicates

the SQE Test is enabled. If the DTE does not require an SQE Test, or if the DTE is a

repeater, place SQE Test switch to “OFF.” The green LED indicates the SQE Test is

disabled. Disable the heartbeat function by turning the SQE Test switch “OFF” when

the Ethernet MAU is connected to a repeater to eliminate the possibility of excessive

collisions.

Installation

The AT-MX10 connects directly to a DTE or workstation AUI connector. Plug the

transceiver into the 15-pin AUI connection on the DTE and slide the connector latch

into place. Power on the DTE and verify that the Power LED is lighted. Check to

ensure that the SQE Test setting is appropriate for equipment per the above

requirements. Plug a BNC-T into the AT-MX10 MAU located at end of Ethernet

segment. Attach 50 W terminator to vacant side of “T” connector. If the AT-MX10 is

located in the middle of a segment, connect the “T” to the AT-MX10S and attach thin

coax segments to each side of the “T.” IEEE 802.3 Specifications: 185m (606 ft.)

maximum cable length, maximum of 30 MAU transceiver attachments.

Manufacturer:  Allied Telesis                           

Part #: AT-MX10                      

Type:  Microtranseiver                                        

Enclosure:   Internal   

Physical dimensions:     2.5” x 1.8” x 0.8”, 0.15lbs